man... oh man... oh man... there is little room to put an exhaust system on you FrankenBoxster!
It took over 60 man hours of labor to get this system in place... sure hope it sounds good:-)
AND OKTOBERFEST IS ALMOST HERE!!!
Look at that connection from the downpipes to the mufflers - it's a corkscrew!!!
Here's some photos of the fabrication & build process and other angles of it finished
You've got to start at the Manifolds...here's the first step - the down pipes. There's a lot of important mechanicals to clear and we still have O2 sensors to mount in there somewhere!
Here's a side view.... started with several mandrel bent 180's that we section and weld to make all the odd angles and twist required - and that corkscrew into the mufflers is made from multiple short sections of the mandrel bent pipes to ensure we have smoooooooth flow in the system.
And here's the most important view!! ... and the one that most folks will be seeing:-) the rear view
WE'LL BE SEEING YOU AT OKTOBERFEST!
(sure hope it's running by then and I don't have to push it onto the field Oct 16th)